Journal Articles (21)
- 1. Md. Uddin, Halim Gurgenci, Alex Klimenko and Zhiqiang Guan; "Heat Transfer Analysis of Supercritical CO2 in a High-Speed Turbine Rotor Shaft Cooling Passage", Journal of Thermal Science and Engineering Progress, 2023
- 2. Md. Uddin, Halim Gurgenci, and Zhiqiang Guan; "Pressure Profile and Stiffness Analysis of Supercritical CO2 Inside a Rotating Annulus Cooling Passage Using CFD", Journal of Tribology (JSME), 145(11): 114102, 2023
- 3. Md. Uddin, Md. Imran Khan, Sadman Bin Shafiq, Shahriar Sadik, Md. Sohel Rana, Khaled Mohammad Shifullah Bhuiya, Sabbir Ahmed Udoy, Md. Khalid Hasan Rafi; "Structural analysis and material selection for biocompatible cantilever beam in soft robotic nanomanipulator", Bibechana Journal, 2023
- 4. Md. Uddin, H. Gurgenci, Z. Guan, A. Klimenko, J. Li, J. Li, L. Li; "Design a Cooling Pillow to Support a High-Speed Supercritical CO2 Turbine Shaft", Applied Thermal Engineering, 2021
- 5. Md. Uddin, A.Z.M. Rahman and Sumon Mondol; "Energy and Environmental Benefit of Solar Charging System for Charging Auto-rickshaw in Developing Countries", The Global Environmental Engineers, 2021
- 6. Md. Shazib Uddin, SK Shamim Iqbal and Md. Talukdar; "Household Energy and Environmental Analysis to Highlight the Impact of Modern Energy Access in Bangladesh", Taylor and Francis Group, 2017
- 7. Md. Shazib Uddin, Soumya Mondal and Md. Fajle Rabbi; "Assessment of Embodied Energy and GHG Emission during the Brick Manufacture of Bangladesh", Journal of Nature Science and Sustainable Technology, 2017
- 8. Md. Shazib Uddin, A. N. Faisal Ahmed, Sayeed Ahmmed; "Assessment of Energy Security Snapshot in Developing Country Bangladesh", Journal of Environmental Science, Toxicology and Food Technology, 2016
- 9. Md. Shazib Uddin and Mahadi Hasan Masud; "A Prospective Assessment of Benefit Using Energy Efficiency Measures on Building Appliances: Case Study of University Campus", International Journal of Advanced Renewable Energy Research, 2016
- 10. Md. Shazib Uddin, Raju Ahmed, Masudur Rahman; "Performance Evaluation and Life Cycle Analysis of Earth to Air Heat Exchanger in a Developing Country", Energy and Buildings, 2016
- 11. Md. Shazib Uddin, Masud Parvez and Md. Enamul Haque.; "Construction and Performance Study of a Rock Bed Integrated Green House Type Solar Air Heater with Solar Dryer", Journal of Environmental Science, Toxicology and Food Technology, 2016
- 12. Md. Shazib Uddin and S. Kumar; "Energy and environmental analysis of domestic solar hot water system in Asian developing country context-Thailand", Journal of Environmental Progress and Sustainable Energy, 2015
- 13. Md. Shazib Uddin and S. Kumar; "Energy, Emissions and Environmental Impact Analysis of Wind Turbine Using Life Cycle Assessment Technique", Journal of Cleaner Production, 2014
- 14. Mohammad Nurul Islam, Uzzal Hossain Joardder, SM Najmul Hoque and Md. Shazib Uddin; "A comparative study on pyrolysis for liquid oil from different biomass solid wastes", Procedia Engineering, 2013
- 15. Mollah Shahadat Hossain Lipu, Md. Shazib Uddin and Ahad Rahman Miah; "A Feasibility Study of Solar-Wind-Diesel Hybrid System in Rural and Remote Areas of Bangladesh", International Journal of Renewable Energy Research, 2013
- 16. Md. Shazib Uddin, Mohammad Uzzal Hossain Joardder and Mohammad Nurul Islam; "Design and Construction of Fixed Bed Pyrolysis System and Plum Seed Pyrolysis for Bio-oil Production", International Journal of Advanced Renewable Energy Research, 2012
- 17. Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin and Mohammad Nurul Islam; "The Utilization of Waste Date seed as Bio-Oil and Activated Carbon by Pyrolysis Process", Journal of Advanced Mechanical Engineering, Vol 2012, ID 316806, 2012
- 18. Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin, and Mohammad Nurul Islam; "Fixed Bed Pyrolysis of Biomass Waste for Liquid Oil Production", Southeast University Journal, Vol 5, No 5, pp 41-48, 2010
- 19. Mohammad Rofiqul ISLAM, Hiroyuki HANIU, Mohammad Nurul ISLAM, and Md. Shazib Uddin; "Thermochemical Conversion of Sugarcane Bagasse into Bio-Crude Oils by Fluidized-Bed Pyrolysis Technology", Journal of Thermal Science and Technology, vol 5, no 1, 2010
- 20. Md. N. Nabi, S. M. N. Hoque and Md. S. Uddin; "Production of Biodiesel in Bangladesh from Inedible Renewable Pithraj Oil (Aphanamixis polystachya) and Experimental Investigation of Methyl Esters as Biodiesel on CI Engine", International Energy Journal (IEJ), RERIC, 11, 73-80., 2010
- 21. SM Najmul Hoque, Md. Nurun Nabi and Md. Shazib Uddin; "Prospect of Jatropha Curcas and Pithraj Cultivation in Bangladesh", Journal of Engineering and Technology, vol 7, no 1, 41-54, 2009
Conference Papers (25)
- 1. Md. Uddin, K. M. Shifullah Bhuiya, Sabbir Ahmed Udoy, Md Abu Sakib Mozumder, Sadia Mortuza, Md Mostafizar Rahman Rony and Abdul Mojid Parvej; "Energy Analysis and Energy Saving Potential of an Apparel Production in Bangladesh", ICME 2023, Bangladesh, 2023
- 2. Md Uddin, Alex Klimenko and Zhiqiang Guan; "Viscous Dissipation of Supercritical CO2 Turbulent Flow through the Rotating Annulus", ICMIME 2022, 2022
- 3. Md. Uddin, H. Gurgenci, A. Klimenko and Z. Guan; "Super-critical CO2 Behavior in a Concentric Annulus Based on Ideal Gas and Real Gas Properties", Australian Combustion Symposium, 21-23 Nov, Toowoomba, QLD, 2021
- 4. Md. Uddin, H. Gurgenci, A. Klimenko and Z. Guan; "Supercritical CO2 Turbulent Flow and Heat Transfer Behavior in a Concentric Rotating Annulus", Australian Combustion Symposium, 21-23 Nov, Toowoomba, QLD, 2021
- 5. Jishun Li, Hal Gurgenci, Zhiqiang Guan, Jun Li, Md. Shazib Uddin, Lun Li; "BEARING AND SEAL SELECTION FOR A HIGH-TEMPERATURE SUPERCRITICAL CO2 TURBINE", Proceedings of Global Power and Propulsion Society (Beijing Conference), 2019
- 6. Md. Shazib Uddin, Md. Saiful Islam, Fazlur Rashid, A.Z.M.Waliur Rahman and Sumon Kumar Mondol; "Feasibility Study of a Solar Charging Station for Charging Auto-rickshaw in Bangladesh", International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December, 2017
- 7. Md. Shazib Uddin, Md. Saiful Islam, Nazmus Sadat and Sharmin Saika; "Design And Construction of a Light Weight User Friendly Travelling Mosquito Net", Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2017 (ICMERE2017) 18 – 20 December, 2017
- 8. Md. Shazib Uddin, Md. Saiful Islam, Md. Fazlur Rashid, Isahak Mohammad Habibulla and Nazmul Haque; "Energy and Carbon Footprint Analysis of University Vehicles in Bangladesh", International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December, 2017
- 9. Md. Shazib Uddin, Amit Roy, Manjur Morshed, Soumya Mondal and Md.Fajle Rabbi; "Assessment of Embodied Energy and GHG Emission during the Brick Manufacture of Bangladesh", International Conference on Petroleum Engineering 2016 (ICPE-2016), 2016
- 10. Md. Shazib Uddin, Md. Saiful Islam and Manjur Morshed; "Life Cycle Energy and Emission Analysis of a Crystalline Silicon PV Module", International Conference on Mechanical, Industrial and Energy Engineering-2016, 26-27 December, 2016
- 11. Md. Shazib Uddin, Mahadi Hasan Masud and Soumya Mandal; "Assessment of energy consumption and emissions of Jute mill production line in Bangladesh", International Conference on Mechanical Engineering (ICME)-2015, December, 2015
- 12. Md. Shazib Uddin, Mahadi Hasan Masud, Soumya Mandal and Monjur Morshed; "Construction and Performance Study of Underground Assisted Air Heating and Cooling System", International Conference on Mechanical Industrial and Materials Engineering (ICMIME)-2015, December, 2015
- 13. Md. Shazib Uddin, Soumya Mandal, Mehadi Hasan Masud and Monjur Mourshed; "Design, Construction and Performance Test of a Solar Powered Prototype Vehicle", International Conference on Mechanical Industrial and Materials Engineering (ICMIME)-2015, December, Rajshahi, 2015
- 14. Md. Shazib Uddin, S. M. Rasid, Amit Roy and S. Kumar; "Energy and Emission Analysis of Evacuated Tube Solar Water Heating System Using Life Cycle Approach", Proceedings in the 15th annual paper meet, Dhaka., 2013
- 15. Md. Shazib Uddin, S. M. Najmul Hoque and Murari Mohon Roy; "“Performance and Emission Comparison of a DI Diesel Engine Fueled by Diesel and Diesel-biodiesel Blend without and with EGR Condition", Proceedings of the 5th BSME-ICTE International Conference , December, 2012, Dhaka, 2012
- 16. M. U. H. Joardder , M. N. Islam , M. S. Uddin, M.Hasan; "Pyrolysis of Pine Seed for Liquid Oil Production", Proceedings of the 4th KKU International Engineering Conference (KKuience 2012),10-12 May, 2012, Thailand, 2012
- 17. Mohammad Nurul Islam, Mohammad U.H.Joardder (Omar), S M Najmul Hoque and Md Uddin; "A Comparative Study on Pyrolysis for Liquid Oil from Different Biomass Solid Wastes.", 5th BSME International Conference on Thermal Engineering, 2012, Dhaka (Procedia Engg), 2012
- 18. Mohammad Uzzal Hossain Joardder, M.S.Uddin, Barun Kumar Das and Omar Faroque; "Renewable Energy Snapshot and Prospect in Bangladesh", Proceedings of the International Conference on Mechanical Engineering and Renewable Energy (ICMERE), 23-24 December, 2011, CUET, Chittagong, 2011
- 19. Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin and Murari Mohon Roy; "Effect of Engine Backpressure on the Performance and Emissions of a CI Engine", Proceedings of the 9th International Conference on Mechanical Engineering (ICME), 18-20 December, 2011, Dhaka, Bangladesh, 2011
- 20. M. U. H. Joardder*1, M. S. Uddin2 & M. Ahmed; "Design and Construction of a Simple Viscometer for Incompressible Fluid and Performance Study", Proceedings of the Conference on Engineering Research, Innovation and Education (CERIE), February, 2011, Sylhet, 2011
- 21. Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin and Md. Abdul Kader; "“Fixed Bed Pyrolysis of Mahogony Seeds (Swietenia macrophylla) Waste for Liquid Oil Production", Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering, 23-24 December, 2010, Khulna, 2010
- 22. Md. Shazib Uddin, Mohammad Uzzal Hossain Joarder, Achinta Kumar Sarker and Ruhul Islam; "Methyl Ester Preparation from Peanut Oil and Its Effect on DI Diesel Engine Combustion", Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering, 23-24 December, 2010, Khulna, 2010
- 23. Shahjada Mahmudul Hasan and Md. Shazib Uddin; "Material Picking and Handling Robot”. Proceedings of the Conference on Engineering Research", Innovation and Education (CERIE), 11-13 January, 2010, Sylhet., 2010
- 24. Md. Mostafizur Rahman, Md. Shazib Uddin* and S.M. Najmul Hoque; "Preparation of Biodiesel from Waste Cook Oil and Performance and Emission Study of a Diesel Engine with Diesel-Biodiesel Blends", Proceedings of the Conference on Engineering Research, Innovation and Education (CERIE), 11-13 January, 2010, Sylhet, 2010
- 25. S.M. Najmul Hoque, Md. Shazib Uddin, Md. Nurun Nabi and Md. Mostafizur Rahman; "Biodiesel from Non-Edible Renewable Karamja Seed Oil and its Effect on DI Diesel Engine Combustion", Proceedings in the 4th BSME-ASME International Conference on Thermal Engineering, 27-29 December, 2008, Dhaka, 2008